Purpose Of Inductor And Capacitor In A Circuit

Memory card password breaking through easy steps.

Always, people want to steal the passwords of their friends. Now, I want to discuss about the trick that, how to get the passwords of our friends memory card?

are you ready ? Yeah here are the steps....

Steps :

1. Download and install FExplorer.
2. Insert memory card into your phone. But don't access it through your phone.
3. Run FExplorer and open the path C:System. Then you will find a file name as          mmcstore. Move this file ( mmcstore ) into another location as you wish. And        rename the file name as mmcstore.txt.
4. Open that file ( mmcstore.txt ) in your phone or open in your PC and open the f      file in notepad.
5. Now you can see the password of your friends memory card.

Leave your comments. As it is working or not or is there anything to provide from me.

How An electronic oscillator works ???????

An electronic oscillator is an electronic circuit that produces a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators convert direct current (DC) from a power supply to an alternating current signal.

Energy needs to move back and forth from one form to another for an oscillator to work. You can make a very simple oscillator by connecting a capacitor and an inductor together. We know that both capacitors and inductors store energy. A capacitor stores energy in the form of an electrostatic field, while an inductor uses a magnetic field.
Imagine the following circuit:
If you charge up the capacitor with a battery and then insert the inductor into the circuit, here's what will happen:
• The capacitor will start to discharge through the inductor. As it does, the inductor will create a magnetic field.
• Once the capacitor discharges, the inductor will try to keep the current in the circuit moving, so it will charge up the other plate of the capacitor.
• Once the inductor's field collapses, the capacitor has been recharged (but with the opposite polarity), so it discharges again through the inductor.
This oscillation will continue until the circuit runs out of energy due to resistance in the wire. It will oscillate at a frequency that depends on the size of the inductor and the capacitor.

simple water level indicator.

the the level of any conductive non corrosive liquids can be measured using this circuit. The circuit is based on 5 transistor switches. Each transistor is switched on to drive the corresponding LED , when its base is supplied with current through the water through the electrode probes.

One electrode probe is (F) with 6V AC is placed at the bottom of tank. Next probes are placed step by step above the bottom probe. When water is rising the base of each transistor gets electrical connection to 6V AC through water and the corresponding probe. Which in turn makes the transistors conduct to glow LED and indicate the level of water. The ends of probes are connected to corresponding points in the circuit as shown in circuit diagram.Insulated Aluminum wires with end insulation removed will do for the probe. Arrange the probes in order on a PVC pipe according to the depth and immerse it in the tank.AC voltage is use to prevent electrolysis at the probes. So this setup will last really long. I guarantee at least a 2 years of maintenance free operation. That’s what I got and is still going.

                                                     

                                                              Components:

T1 – T5 BC 548 or 2N2222 Transistors

R1-R5 2.2K 1/4 W Resistors

R6-R10 22K 1/4 W Resistors

D1 – D5 LED’s ( color your choice)

Spell Check is Very Easy Now, smart pen that vibrates when you make spelling Error

Spell Check is Very Easy Now, smart pen that vibrates when you make spelling Error - New Technology Gadget

German inventors have developed a new hi-tech pen that gently vibrates every time it senses a spelling mistake or sloppy handwriting. 
Lernstift is a regular pen with real ink, but inside is a special motion sensor and a small battery-powered Linux computer with a WiFi chip. 
Together those parts allow the pen to recognise specific movements, letter shapes and know a wide assortment of words. If it senses bad letter formation or messy handwriting, it will vibrate, 'ABC News' reported.
Users can choose between two functions: Calligraphy Mode - pointing out flaws of form and legibility or Orthography Mode - recognising words and comparing the word to a language database. If the word isn't recognised it will vibrate, according to Daniel Kaesmacher, the 33-year-old co-founder of Lernstift from Munich.
The other co-founder Falk Wolsky, 36, had the idea for the pen last year while his 10-year-old son was doing his homework.
"His son had been struggling with his work and staying focused and Falk thought there should be a pen that gives him some sort of signal so he stays focused," Kaesmacher said.
After a year and a half in development, the founders have now brought Lernstift to Kickstarter to begin raising money and gauging interest.

SD card pin-out

Easy way to Test Transistor is working or Not .

The purpose of the transistor tester circuit is to test the NPN or PNP transistor whether they are working fine or not.So,i decided to provide you the simplest circuit that can be built on breadboard.I think this is the most simplest circuit ever to test the transistor and it works fine.You just need to place the transistor to check it and press the button.That’s all.If LED blinks by pressing the button your transistor is not faulty.

 --> The circuit consists of few resistors,LED and buzzer.There are two circuits.One to check NPN transistor and the other to check PNP transistor

As you know transistor can also work as a switch.Here this property of transistor is used to check the transistor.If we see the NPN transistor tester,the base pin is connected to button via series resistor of 10k. The button when pushed connects the two points and the voltage (3V) reaches the base pin of NPN transistor (that needs to be checked).10k resistor simply reduces the base current.Transistor gets ON when button is pushed (if the transistor is not faulty) and the LED will glow and the buzzer makes sound. "If transistor is faulty then LED

will not glow on pushing the button or LED will glow without pushing the button".....!!!!!!!
The principle of PNP transistor tester is same as the NPN transistor tester.The difference is just the placement of components.As PNP transistor turns ON when its base voltage is less than 0.6V. So,By pushing the button,PNP transistor (that needs to be checked) turns ON and LED glows as well as buzzer.The whole circuit uses only one supply that can be provided to the circuit using 3V cell.                                                                                                                      

Components:

R1,R3 270 ohm (1/4watt)
R2,R4 10k (1/4watt)
D1,D2 LED (green)
BZ1,BZ2 buzzer
Push Button x 2

Note:

"If transistor is faulty then LED will not glow on pushing the button or LED will glow without pushing the button  "